
		*** Apollo Printer Windows Drivers ***

The proprietary Apollo Printer Drivers you have received on this diskette
is provided for your use exclusively with the Apollo Printers you have 
purchased.  Use of any of these Drivers in any other circumstance is 
strictly prohibited.

The Drivers have been designed for use under Windows 3.1x and Windows 
95.  They have been used successfully with a variety of Microsoft(R) 
and other vendor products.  After installing a Driver, its ease of use 
and the results that are achieved depend solely on the Windows(TM) 
applications involved.  Tharo Systems does not warrant these Drivers 
for use with any specific software, and does not offer application 
dependent support.

These Drivers are for use with your standard Windows software, and are 
not intended for use with special labeling software such as Easylabel.  
When using labeling software with built-in drivers for your Apollo 
printer, the use of a Apollo Printer Windows Driver might cause a 
conflict.

There is no separate documentation for these Drivers.  After 
installation, extensive On-line Help text will be available regarding the 
printer specific options, suggestions about using the driver with 
Windows applications, and information on barcoding and symbologies.

For technical support on this product, please have your printer model
and serial number available, then call or fax:

			Tharo Systems, Inc.
			(800) 878-6833 or (330) 273-4408
			Fax:   (330) 225-0099
	
			Email: tharo@tharo.com
			WWW:   www.tharo.com


	    *****>  INSTALLATION UNDER WINDOWS 3.1X  <*****

The following steps are required to install the Apollo Printer Windows 
Drivers under Windows 3.1 or 3.11:

    -  Insert the Apollo Printer Windows Drivers diskette into your disk 
       drive.
    -  From Program Manager, select the File option
    -  Select Run
    -  Type 'A:\SETUP', then click OK
    -  Click Continue
    -  Select the printer and language to be installed, then click 
       INSTALL
    -  Select the port that the printer will be connected to, then click 
       OK
    -  Installation is now complete, click RETURN TO WINDOWS



		 *****> INSTALLATION UNDER WINDOWS 95  <*****

The following steps are required to install the Apollo Printer Windows Drivers
under Windows 95:


    -  Insert the Apollo Printer Windows Drivers diskette into your disk 
       drive.
    -  Click the Start button
    -  Click Run
    -  Type 'A:\SETUP', then click OK
    -  Click Continue
    -  Select the printer and language to be installed, then click 
       INSTALL
    -  Select the port that the printer will be connected to, then 
       click OK
    -  Installation is now complete, click RETURN TO WINDOWS


    *** The Apollo Printer Windows Drivers is not written specifically for 
       Windows 95, but is compatible where Windows 95 follows Windows 3.1x 
       conventions.  The Print Test option available during printer install 
       is specific to Windows 95 and is not supported by the driver.  
       Selecting it may cause a General Protection Fault (GPF).

    *** The driver program and associated help files will be copied to
       your \WIN95\SYSTEM directory.


		 *****>  INSTALLATION OF MULTIPLE PRINTERS  <*****

For Windows 3.1x
 
You may install multiple printer drivers. You may also install the same 
driver more than once if multiple printers will be used on separate 
ports.  You are only limited by the number of ports that are available.

-  Insert the Apollo Printer Windows Drivers diskette into your disk 
   drive.
-  From Program Manager, select the File option
-  Select Run
-  Type 'A:\SETUP', then click OK
-  Click Continue
-  Select the printer and language to be installed, then click 
   INSTALL
-  Select the port that the printer will be connected to,(be sure that 
   it is a different port than the first printer is on) then click OK
-  Installation is now complete, click RETURN TO WINDOWS


For Windows 95 

You may install multiple printer drivers. You may also install 
the same driver more than once if multiple printers will be used on 
separate ports.  However it will be necessary to rename the existing 
driver so it is not overwritten by the subsequent driver installation.
Following are the steps required to rename the existing driver;

-  Insert the Apollo Printer Windows Drivers diskette into your disk 
   drive.
-  Click the Start button
-  Click Control Panel
-  Select 'Printers' from the options in 'Control Panel'.
-  Once in 'Printers' highlight the Apollo Printer that you will be 
   installing more than one of.
-  Select 'File' from the menu bar, then 'Rename', and give the Apollo 
   Printer a new name, such as "Apollo1".
-  Close all open windows and return to the main screen.
-  Click the Start button.
-  Click Run
-  Type 'A:\SETUP', then click OK 
-  Click Continue
-  Select the printer and language to be installed, then click INSTALL
-  Select the port that the printer will be connected to,(be sure that 
   it is a different port than the first printer is on) then click OK
-  Installation is now complete, click RETURN TO WINDOWS

